DBA Brakes · Part number DBA2616E · NZ$168.00 incl. GST
Need new disc brake rotors for your Honda Civic? These DBA ones are a mint choice for safe and sound braking.
NZ$168.00 including GST. Part number DBA2616E.
Disc Brake Rotor Replacement: The DBA Way
> Disc brake rotors are key to your Honda Civic's stopping power. They wear down over time from heat, friction, and road grit, which can make braking dodgy. This is especially true if your Civic is a daily driver battling stop-start traffic. Let's get those brakes sorted!
Spotting the Signs of Wear
• Squealing or grinding – sounds like a rusty gate opening?
• Brake pedal has a wobble or pulse?
• Taking longer to stop than usual?
• Rotors look scored, cracked, or rusty?
• Brake pads wearing unevenly?
WOF Woes?
Worn brake rotors are a common reason for failing a WOF here in New Zealand. Your rotors need to be above the minimum thickness and free from major damage to pass the test.
DIY or Workshop?
Difficulty: 6/10
Estimated Time: 2-3 hours per axle
Tools Required: Jack and stands, lug wrench, socket set, wrench set, brake caliper tool, torque wrench, brake cleaner, gloves, safety glasses
🛠️ Bob's "Get It Done Right" Companion Checklist
Alright, before you get cracking on those brakes, let's make sure you're set up for success. Safety first, always! Never get under a car supported only by a jack – use proper stands. Grab some Nitrile Gloves to keep your hands clean, and Safety Glasses to protect your eyes from brake dust and grime. Blast those rotors and calipers clean with some Brake Cleaner – it'll make the job smoother. A little dab of anti-seize caliper grease on the right spots will keep things moving freely too.
Expert Recommendation
Worn rotors mean dodgy brakes, and that's a no-brainer for safety. Swapping them out will get your Civic stopping like new. Pop into Bob's Shop, and I'll help you find exactly what you need for your Civic.
Fitment Notes
Make sure the new rotors are the right match for your Civic's year and model. Rotor sizes and thickness can vary depending on the trim level and braking system. Double-check they fit your existing calipers and pads.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> GDB3268)](/parts/GDB3268) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.