DBA Brakes · Part number DBA2580S · NZ$307.00 incl. GST
Gotta keep those brakes sharp on your Suzuki Escudo or Grand Vitara, right? New brake rotors are key for stopping safely, especially in these SUVs.
NZ$307.00 including GST. Part number DBA2580S.
Swapping Out Your Disc Brake Rotors — DBA Style
> Your Suzuki Escudo or Grand Vitara's brakes are what keep you safe on the road, eh? Rotors cop a beating over time, wearing down and sometimes warping. This means less stopping power, which is never good, especially when you're carting the family around.
Spotting the Signs
• Brakes squealing like a rusty gate?
• Feeling a judder in the pedal when you brake?
• Taking longer to pull up than usual?
• Rotors looking rough with scoring or rust?
• Brake pads wearing unevenly?
WOF Woes?
Dodgy brake rotors are a surefire way to fail your WOF here in NZ. They need to be above the minimum thickness and in good nick to pass the test. Don't get caught out.
DIY or Get a Pro?
Difficulty: 6/10
Time Needed: 1.5 - 2 hours per axle
Gear You'll Need: Jack and stands (never get under a car supported only by a jack!), wheel brace, socket set, torque wrench, brake cleaner, and maybe a caliper piston tool.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you even think about cracking open the toolbox, safety first, yeah? Grab yourself some safety glasses to keep the crud out of your eyes, and a decent pair of nitrile gloves to keep your hands clean. Brake dust is nasty stuff! While you're at it, a can of Brake Cleaner is your best mate for blasting away all that carbon dust and grime. And don't forget a bit of anti-seize caliper grease for the caliper bolts – makes life easier next time around!
Expert Recommendation
Worn rotors are a no-brainer when it comes to safety. Getting them sorted means your Suzuki will stop like it should, keeping you and your whānau safe. Swing by Bob's Shop, and we'll find the perfect fit for your Suzuki. Chur!
Fitment Notes
Double-check the new rotors are the right match for your Suzuki Escudo or Grand Vitara's year and model. Rotor sizes can vary. Also, make sure they're sweet with your ABS and other brake bits and pieces.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> GDB3436)](/parts/GDB3436) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.