DBA Brakes · Part number DBA2339E · NZ$362.00 incl. GST
Gotta keep those brakes sharp, eh? Disc brake rotors are your Infiniti's first line of defence for safe stopping.
NZ$362.00 including GST. Part number DBA2339E.
Rotor Replacement for Your Infiniti — DBA's the Name
> Disc brake rotors, eh? They're what your brake pads squeeze to stop your Infiniti. Over time, they wear from heat and hard yakka, especially if you're giving it heaps in the city like most Infiniti M, FX, and Q drivers do.
Spotting Trouble
• Brakes sound like a bag of nails?
• Pedal's got the shakes?
• Taking longer to pull up?
• Rotors look like they've seen better days?
• Pads wearing uneven?
WOF Woes?
Dodgy rotors are a dead cert for a WOF fail. They gotta be thick enough and not too mangled to pass muster.
DIY or Get a Pro?
Difficulty: 6/10
Time Needed: 2-3 hours per axle
Gear You'll Need: Jack and stands, lug wrench, socket set, torque wrench, brake cleaner, rotor puller (maybe)
🛠️ Bob's "Get It Done Right" Companion Checklist
Alright, before you get cracking, let's make sure we're doing this right, the Kiwi way.
• Safety First, Mate: Never get under a car held up by just a jack! Use proper stands; your life's worth more than a cafe lunch.
• Keep it Clean: Brake dust is nasty stuff. Give everything a good blast with Brake Cleaner. It'll help you see what you're doing and keep the dust down.
• Handy Hands: Grab some Nitrile Gloves to keep your mitts clean and protected. No one wants brake dust under their fingernails.
• Don't Seize Up: A little smear of anti-seize on the caliper bolts will make the next brake job a no-brainer. Trust me, you'll thank yourself later.
Expert Recommendation
Dodgy rotors mean dodgy brakes. Replacing them keeps your Infiniti stopping like it should. Bob's always here to help find the right bits for your Infiniti. Pop into Bob's Shop for a yarn!
Fitment Notes
Make sure you get the right rotor size for your Infiniti's year and model. Some have different setups depending on the trim.
Bob's tip: When you're shopping, don't forget to check out our range of Brake Cleaner and Nitrile Gloves to make the job easier and cleaner!
---
🛠️ Bob's Pro Tip: Do the Job Right!
> GDB3294DT)](/parts/GDB3294DT) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.