DBA Brakes · Part number DBA2182E · NZ$228.00 incl. GST
G'day! If you're tackling the brakes on your trusty Nissan Navara NP300, remember the disc brake rotors are what the pads grip to bring you to a stop. Keep 'em in tip-top shape for safe as houses driving, whether you're on the tarmac or hitting the dusty metal tracks. DBA's a top-notch choice, and we've got 'em.
NZ$228.00 including GST. Part number DBA2182E.
Swapping Out Your Brake Rotors — With a Nod to DBA
> Brake rotors are those shiny metal discs doing the rounds with your wheels. When you hit the brakes, the pads squeeze these rotors, using friction to slow your Navara down. Over time, they cop a beating with heat and wear, maybe even crack, which is no good for stopping power, especially when you're hauling a load or towing the boat.
Tell-tale Signs It's Time for New Rotors
• You're feeling a shudder through the brake pedal or steering wheel when braking.
• The brakes are squealing like a banshee or making a grinding noise.
• It's taking longer to pull up than it used to.
• You can see grooves, cracks, or funny colours on the rotor surface.
• The brake pedal feels soft as butter.
WOF Woes?
Nah mate. Dodgy brake rotors are a big no-no and will have you sweating at WOF time. They need to be a certain thickness and free from cracks and hot spots to pass the test.
DIY or Get a Pro?
Difficulty: 6/10 (A decent challenge)
Time Needed: An hour or two per axle (front or back)
Gear You'll Need: Jack, stands, wheel nut wrench, brake caliper socket/spanner, C-clamp or piston tool, torque wrench, wire brush, brake cleaner, safety glasses, gloves.
🛠️ Bob's "Get It Done Right" Companion Checklist
Alright, before you get cracking, safety first, yeah? Never get under a Navara supported only by a jack – axle stands are your mates here. Grab some safety glasses to keep the brake dust out of your peepers, and a decent set of nitrile gloves will save your hands from getting covered in muck. Give those new rotors a good blast with Brake Cleaner to get rid of any packing grease, and a wee smear of anti-seize caliper grease on the right spots helps everything slide nicely. Trust me, a little prep goes a long way!
Bob's Two Cents
I reckon you should always swap out those brake rotors when they're looking worse for wear to keep your braking spot on. For your Navara, the DBA T2 Street Series rotors are a cracker – they'll give you better stopping, less fade, and last longer, which is just the ticket for a workhorse like yours. Don't skimp on brakes, eh? They're the most important thing on your vehicle. Pop into Bob's Shop, and we'll sort you out with the right bits for your Navara. Sweet as!
Fitment Notes
These DBA rotors are made for the NISSAN NAVARA and NAVARA NP300 dCi models from 2015 onwards. Double-check your year, model, and engine to be sure, because brakes can be different even on the same model.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> Check out our compatible brake pads (part 1612.04) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.