CARFIX

DBA Street T2 Slotted Disc Brake Rotor DBA2180S

DBA Brakes — DBA Street T2 Slotted Disc Brake Rotor — part number DBA2180S

DBA Brakes · Part number DBA2180S · NZ$263.00 incl. GST

DBA Street T2 Slotted Disc Brake Rotor by DBA Brakes, part number DBA2180S.

Price

NZ$263.00 including GST. Part number DBA2180S.

Fits these vehicles

Description

Disc Brake Rotor Replacement: Get Your Nissan Sorted
> Disc brake rotors are dead important for safe stopping in your Nissan Teana or Altima. They're what the brake pads grip to slow you down. Over time, they wear out, warp, or crack from all the heat and hard work, especially with the stop-start of daily driving and the school run.

Spotting the Trouble Signs
• Squealing or grinding when you hit the brakes
• Feeling a wobble or pulsing in the brake pedal
• Taking longer to stop than you used to
• Seeing cracks, deep grooves, or a whole lotta rust on the rotor itself

WOF Worries?
Worn brake rotors are a classic reason for failing a WOF here in NZ. Your rotors need to be above the minimum thickness and free from cracks to pass the test.

DIY or Let the Pros Handle It?
Difficulty: 6/10
Time Needed: About 1.5 - 2 hours per axle
Gear You'll Need: Jack and stands, lug wrench, socket set, torque wrench, brake cleaner, and maybe a brake caliper tool.

🛠️ Bob's "Get It Done Right" Companion Checklist
Before you start ripping into those brakes, mate, a few things to keep you safe and the job tidy:
• Safety First, Chur: Never, ever get under a car that's only held up by a jack. Use proper axle stands – no exceptions!
• Keep it Clean: Brake dust is nasty stuff you don't want to be breathing in. Give everything a good blast with some Brake Cleaner before you start pulling things apart. This will also help you clean the parts before reassembly.
• Hand Protection: Grab yourself some Nitrile Gloves. They'll keep your hands clean and protected from all the grime.
• Lube It Up: A little bit of anti-seize caliper grease will help keep things moving smoothly and prevent future squeaks.

Expert Recommendation
Worn brake rotors are a no-brainer when it comes to safety. Replacing them brings back your Nissan Teana or Altima's full stopping power and lowers the chance of an accident. Bob @ CARFIX is always ready to help you pick the right part for your Nissan. Pop into Bob's Shop for a yarn!

Fitment Notes
Make sure the new rotors are the exact match for your Nissan Teana or Altima's year and model. Rotor sizes and designs can vary.

Bob's waiting to sort you out!

---

🛠️ Bob's Pro Tip: Do the Job Right!
> Check out our compatible brake pads (part GDB1003) to ensure a perfect bed-in and get the job done properly first time!

🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.