DBA Brakes · Part number DBA2086E · NZ$311.00 incl. GST
Land Rover Freelander 2 owners, your disc brake rotors are key to stopping safely, acting as the surface your brake pads grip.
NZ$311.00 including GST. Part number DBA2086E.
Land Rover Freelander 2 Disc Brake Rotor Replacement Guide — DBA Featured
> Your Freelander 2's brake rotors are vital. Over time, they wear from friction and heat, which means your braking might not be as sharp, especially if you're tackling tough conditions or doing lots of city driving.
Signs You Might Need New Rotors
• Squealing or grinding when you hit the brakes
• Feeling a wobble or pulsing through the brake pedal
• Taking longer to stop than usual
• Seeing grooves, cracks, or rust on the rotor
• Your brake pads are wearing unevenly
WOF Worries?
Worn brake rotors are a common reason for failing a WOF here in New Zealand. Your rotors need to be above the minimum thickness and without major damage to pass the test.
DIY or Get a Pro?
Difficulty: 6/10
Estimated Time: 2-3 hours per axle
Tools Required: Jack and stands, wheel wrench, socket set, torque wrench, brake cleaner, caliper piston compression tool (optional)
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you start, safety first! Never get under a car supported only by a jack. Use proper stands, grab some safety glasses to keep the brake dust out of your eyes, and a pair of nitrile gloves to keep your hands clean. While you're at it, a can of Brake Cleaner is perfect for blasting away that carbon dust, and a little anti-seize caliper grease on the right spots will keep things smooth. Sorted!
Expert Recommendation
Worn brake rotors put your Freelander 2's safety at risk. Swapping them out gives you top-notch braking and lowers the chance of an accident. Bob at CARFIX is always keen to help you find the right part for your Land Rover. Pop over to Bob's Shop for a yarn!
Fitment Notes
Double-check it fits your Freelander 2's year and engine (TD4, SD4, or Si4). Check the rotor's size and thickness before you get started.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> GDB1683)](/parts/GDB1683) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.