DBA Brakes · Part number DBA096X · NZ$263.00 incl. GST
Needing to slam on the anchors in your Jeep Grand Cherokee or Wrangler? Your disc brake rotors are the main squeeze for stopping power. CARFIX stocks DBA rotors known for tough braking.
NZ$263.00 including GST. Part number DBA096X.
Jeep Disc Brake Rotor Replacement Guide — DBA Featured
> Disc brake rotors are absolutely vital for stopping safely. Over time, especially if you're giving your Jeep Grand Cherokee or Wrangler a hard time off-road, rotors can wear out, warp, or even crack. This means you won't pull up as quickly, and that's never a good feeling.
Symptoms That Led You Here
• Brake pedal feels like it's vibrating or pulsing when you hit the brakes.
• Hearing squealing or a nasty grinding noise from your wheels.
• Taking way too long to stop.
• Seeing cracks, deep grooves, or heaps of rust on the rotor.
• Your brake pads are wearing out unevenly.
Will it pass WOF?
Buggered brake rotors are a dead-cert WOF failure here in NZ. Your rotors need to be above the minimum thickness and without cracks or major damage to get the green light.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you even think about grabbing your tools, let's sort out the supplies you'll need to make this job a piece of cake – and keep you safe, too!
• Brake Cleaner: Blast away that brake dust and grime! A clean rotor is a happy rotor. Grab a can of Brake Cleaner and make sure your new rotors are spotless before you bed in the pads.
• Anti-Seize Caliper Grease: A tiny dab will keep everything moving smoothly and quietly. This stuff is your friend when it comes to preventing squeals and seizing. Plus it lasts for yonks, so you'll be sorted for the next brake change.
• Safety Glasses: No one wants bits of rust or brake dust in their eyes. Protect your peepers with a decent set of Safety Glasses. Trust me, you'll thank me later.
• Nitrile Gloves: Keep your hands clean and away from brake dust with some heavy-duty Nitrile Gloves. Your skin will thank you for it.
DIY or Workshop?
Difficulty: 6/10
Estimated Time: 2-3 hours per axle
Tools Required: Jack and stands, wheel wrench, socket set, torque wrench, brake cleaner, caliper compressor tool (optional but recommended).
Expert Recommendation
Dodgy brake rotors are a major safety risk for your Jeep. Getting them replaced means you'll stop properly, which is super important, especially if you're tackling tough terrain. Bob at CARFIX is always keen to point you to the right part for your Jeep. Pop over to Bob's Shop for a yarn!
Fitment Notes
Double-check that the new rotors fit your exact Jeep model, year, and trim. Rotor sizes and setups can change. Always swap out rotors in pairs (both sides) so the braking is even as she goes.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> GDB1207)](/parts/GDB1207) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.