CARFIX

NGK Standard Spark Plug BUR6EQ

NGK Spark Plugs · Part number BUR6EQ · NZ$61.00 incl. GST

For your Eunos or Mazda Cosmo (1990-1995), fresh spark plugs are absolutely vital for that rotary engine's sweet spot. NGK plugs are a dead-cert, and CARFIX has 'em, plus other top brands, too.

Price

NZ$61.00 including GST. Part number BUR6EQ.

Fits these vehicles

Description

Spark Plug Refresh for Your Rotary Rocket — NGK Inside!
> Rotary engines like those in the Eunos and Mazda Cosmo run seriously hot, giving those spark plugs a proper hiding. Over time, they get worn, carboned up, and lose their spark. That means rough running and more trips to the petrol station.

Spotting the Signs of Dodgy Spark Plugs
• Engine's misfiring, especially when you put your foot down
• Idling like a tractor
• Suddenly guzzling gas
• Hard to start on a cold morning
• That pesky check engine light's on

Will it pass WOF?
Dodgy spark plugs mean higher emissions, and that's a quick way to fail your WOF.

DIY or Workshop?
Difficulty: 6/10
Estimated Time: 1-2 hours
Tools Required: Spark plug socket, ratchet, extension, torque wrench, spark plug gap tool

🛠️ Bob's "Get It Done Right" Companion Checklist
Alright, before you get cracking, a bit of Kiwi common sense. Safety first, eh? Grab some safety glasses to keep the grit out of your eyes, and a decent set of nitrile gloves to keep your hands clean. A can of Brake Cleaner is perfect for blasting away any oily grime around the spark plug holes. And don't forget that copper anti-seize grease on the new plug threads – just a tiny dab will stop them seizing up later.

Expert Recommendation
Swapping out the spark plugs in your Eunos or Mazda Cosmo is a no-brainer for keeping it running sweet and saving you money at the pump. Bob at CARFIX is your man for sussing out the exact part you need. Pop into Bob's Shop for a yarn!

Fitment Notes
Make sure the spark plug gap is spot-on, just like the manufacturer says for your 1990-1995 Eunos or Mazda Cosmo. Get the specs from your service manual.

---

🛠️ Bob's Pro Tip: Do the Job Right!
> If you're replacing this spark plug, make sure you've got the right workshop prep, protection, and safety gear ready. Taking a bit of extra time and using the proper safety stands and cleaners makes all the difference for a professional result!

🧰 What Else You'll Need:
• Safety First: Always secure your vehicle on heavy-duty safety jack stands before working underneath. Never rely solely on a hydraulic jack.
• Clean Hands: Keep a pack of Nitrile Gloves handy to protect your skin from grease, oils, and chemical sprays.
• Preparation: Have microfibre towels and a suitable parts cleaner nearby to keep components clean during installation.