Whiteline · Part number BMR66Z · NZ$826.00 incl. GST
Got a bit too much lean in the corners of your 2013-2019 Mazda 3 or Axela? Sway bars (or anti-roll bars) are the answer, boosting handling and cutting down body roll. Whiteline's got a replacement, but CARFIX has a whole paddock of options to match your driving style.
NZ$826.00 including GST. Part number BMR66Z.
Taming That Body Roll: A Sway Bar Swap for Your Mazda
> Sway bars are the unsung heroes of your suspension, twisting away to keep your ride flat through the bends. When they, or their bushes, are past their best, you'll feel it – especially in your Mazda 3 or Axela on your daily commute or when you're giving it a bit of stick on the weekend.
Symptoms That Led You Here
• Feeling like you're going to tip over in corners?
• Lane changes feeling a bit wobbly?
• Suspension making more noise than your kids in the back?
• Bushes looking like they've seen better decades?
Will it pass WOF?
A dodgy sway bar setup is a no-go for your WOF. They're pretty strict on things that affect your car's handling and safety.
DIY or Workshop?
Difficulty: 6/10
Estimated Time: 2-4 hours
Tools Required: Jack and stands, socket set, wrenches, penetrating oil, torque wrench
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you dive in, mate, a bit of prep goes a long way. And don't forget your safety glasses – you only get one set of eyes. A good blast of Brake Cleaner on the new bar and surrounding area will get rid of any grime, and a smear of anti-seize grease on the bushings will keep things quiet. Lastly, grab some Nitrile Gloves to keep the hands clean.
Expert Recommendation
Sloppy handling isn't just a pain, it's a safety issue. Swapping out that tired sway bar (and its bushes) will bring back that factory-fresh feel to your Mazda 3 or Axela. Whiteline is a solid choice, but we've got plenty of other brands at CARFIX. Bob @ CARFIX is your guy for sussing out the perfect part for your Mazda 3 or Axela. Pop into Bob's Shop for a yarn!
Fitment Notes
Double-check that the new sway bar is a match for your Mazda 3 or Axela's year and model. Keep an eye out for differences in how it mounts and the thickness of the bar.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're replacing this sway bar, make sure you've got the right workshop prep, protection, and safety gear ready. Taking a bit of extra time and using the proper safety stands and cleaners makes all the difference for a professional result!
🧰 What Else You'll Need:
• Safety First: Always secure your vehicle on heavy-duty safety jack stands before working underneath. Never rely solely on a hydraulic jack.
• Clean Hands: Keep a pack of Nitrile Gloves handy to protect your skin from grease, oils, and chemical sprays.
• Preparation: Have microfibre towels and a suitable parts cleaner nearby to keep components clean during installation.