Bosch Eco Wiper Blade 550Mm

Bosch · Part number BBE550 · NZ$45.00 incl. GST

Keep your view crystal clear in any Kiwi weather, from a gentle drizzle to a proper downpour, with top-notch wiper blades.

Price

NZ$45.00 including GST. Part number BBE550.

Fits these vehicles

• Alfa Romeo 156 (1997–2002)
• Alfa Romeo 156 (2000–2002)
• Alfa Romeo 156 (2001–2005)
• Alfa Romeo 156 (2002–2005)
• Alfa Romeo 156 (2002–2005)
• Alfa Romeo 156 (2002–2006)
• Alfa Romeo 156 (2002–2006)
• Alfa Romeo 156 (2002–2006)
• Alfa Romeo Gtv (1996–2000)
• Alfa Romeo Gtv (1997–2003)
• Alfa Romeo Gtv (2000–2005)
• Audi A6 (1994–1995)
• Audi A6 (1994–1995)
• Audi A6 (1994–1995)
• Audi A6 (1994–1997)
• Audi A6 (1994–1997)
• Audi A6 (1994–1997)
• Audi A6 (1994–1997)
• Audi A6 (1997–2000)
• Audi A6 (1997–2000)
• Audi A6 (1997–2005)
• Audi A6 (1997–2005)
• Audi A6 (1997–2005)
• Audi A6 (1997–2005)
• Audi A6 (1997–2005)
• Audi A6 (1997–2005)
• Audi A6 (1998–2005)
• Audi A6 (1999–2005)
• Audi A6 (1999–2005)
• Audi A6 (1999–2005)
• Audi A6 (2001–2004)
• Audi A6 (2001–2005)
• Audi A6 (2001–2005)
• Audi A6 (2001–2005)
• Audi A6 (2001–2005)
• Audi A8 (1994–1996)
• Audi A8 (1994–1996)
• Audi A8 (1994–1998)
• Audi A8 (1995–1996)
• Audi A8 (1995–1998)

Description

Wiper Blade Replacement Guide — Featuring BOSCH
> Wiper blades are absolutely crucial for your safety on the road, designed to whisk away rain, snow, and all sorts of road gunk from your windscreen, ensuring you can see where you're going. Over time, that rubber simply gives up the ghost — sun, temperature swings, and everyday grime all chip away at it, making them less effective. This is especially true here in Aotearoa, where our weather can change quicker than you can say 'four seasons in one day'!
Symptoms That Led You Here
• Streaking or smearing across the windscreen
• Chattering or skipping of the blade
• Unwiped areas or missed spots
• Squeaking noises during operation
• Visible cracks, tears, or hardening of the rubber blade
Will it pass WOF?
Yes, faulty or ineffective wiper blades are a common reason for WOF failure in New Zealand. The WOF inspection specifically checks that wipers operate correctly and clear the windscreen effectively to ensure safe driving visibility.
DIY or Workshop?
Difficulty: 2/10 (Easy)
Estimated Time: 5-15 minutes
Tools Required: None (or a small flathead screwdriver for some older clip types)
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you dive into swapping out those old wipers, let's make sure you've got everything you need for a smooth, safe job. A bit of prep goes a long way!
• Cleanliness is Key: Grab some [Workshop Rags] to wipe down the windscreen and the wiper arms. A clean surface makes everything easier.
• Crystal Clear Finish: A good quality glass cleaner and a fresh microfibre towel will ensure your windscreen is spotless once the new blades are on. Nothing worse than new blades on a dirty screen!
• Top Up That Washer Fluid: While you're at it, make sure your windscreen washer fluid reservoir is topped up with a good quality mix. It's a no-brainer for keeping things clear between wipes.

Expert Recommendation
Bob @ CARFIX reckons you should be swapping out those wiper blades at least once a year. Seriously, as soon as you spot any signs of them giving up — streaks, chattering, or just not clearing the screen properly — it's time for a fresh set. Seeing clearly is non-negotiable for safety on our Kiwi roads, whether you're battling city traffic or cruising down a country lane. The BOSCH BBE550 Wiper Blade is a fantastic shout — they're built tough and do a brilliant job. Pop into Bob's Shop for a yarn; he'll help you figure out exactly what your vehicle needs. Sorted!
Fitment Notes
This is a universal fitment or general application product. Always check the specific length and attachment type required for your vehicle's make and model to ensure correct fitment. While designed for broad compatibility, variations exist across different vehicle manufacturers and years.

---

🛠️ Bob's Pro Tip: Do the Job Right!
> If you're replacing this part, make sure you've got the right workshop prep, protection, and safety gear ready. Taking a bit of extra time and using the proper safety stands and cleaners makes all the difference for a professional result!

🧰 What Else You'll Need:
• Safety First: Always secure your vehicle on heavy-duty safety jack stands before working underneath. Never rely solely on a hydraulic jack.
• Clean Hands: Keep a pack of Nitrile Gloves handy to protect your skin from grease, oils, and chemical sprays.
• Preparation: Have microfibre towels and a suitable parts cleaner nearby to keep components clean during installation.