
NGK Spark Plugs · Part number APR6FS · NZ$17.17 incl. GST
Keep your classic Ford humming sweet as a kitten with fresh spark plugs!
NZ$17.17 including GST. Part number APR6FS.
Give Your Ford Some Sparkle: Spark Plug Replacement with NGK
> Spark plugs are the unsung heroes, delivering that essential zap to ignite the fuel in your engine. Over time, they get worn out from heat and carbon, especially in those trusty old Fords like the Cortina or Fairlane. Replacing them brings back the power and saves you petrol money.
Spotting the Signs of Dodgy Spark Plugs
• Engine's misfiring, making it idle rough and hesitate.
• Fuel economy's gone down the gurgler.
• Hard to start the engine, especially on those frosty mornings.
• Exhaust emissions are up.
• That pesky check engine light's on.
Will it Get a WOF?
Dodgy spark plugs mean more emissions, and that's a quick way to fail your WOF. Get them sorted!
DIY or Get a Pro?
Difficulty: 6/10
Estimated Time: 1-2 hours
Tools Required: Spark plug socket, ratchet, torque wrench, spark plug gap tool, and maybe an extension.
Expert Advice
Swapping out your spark plugs is a no-brainer for keeping your Ford running sweet and saving on fuel. Bob @ CARFIX is your man for finding exactly what you need for your Ford. Pop over to Bob's Shop for a yarn!
🛠️ Bob's "Get It Done Right" Companion Checklist
• Safety First, Mates! Before you even think about touching that engine, disconnect the battery. And never, ever get under a car supported only by a jack. Use proper axle stands – your life's worth it!
• Spark Plug Sockets: Using a proper spark plug socket (with the rubber insert) is a must. These protect the ceramic insulator of the spark plug during installation and removal.
• Keep it Clean: Before you pull out the old plugs, give the area around them a good blast with compressed air. This stops any grit from falling into the cylinders and causing damage.
• Gap Right: Use a spark plug gap tool to make sure the gap is spot-on for your Ford model. Too big or too small, and your engine won't run right.
• Anti-Seize is Your Friend: A tiny dab of anti-seize on the spark plug threads will make life easier next time you change them. Don't go overboard, though!
• Torque it Up: Use a torque wrench to tighten the plugs to the right spec. Too tight, and you risk stripping the threads in the cylinder head. Too loose, and you'll get leaks.
While you're at it, grab some Brake Cleaner to blast away any carbon buildup around the spark plug holes. A pair of Nitrile Gloves will keep your hands clean, too!
Fitment Notes
Make sure that spark plug gap is right for your Ford. Check your service manual. Some older Fords can be a bit tricky to get to the plugs, so you might need some extra tools.
Bob's always here to lend a hand, so give us a shout!
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're replacing this spark plug, make sure you've got the right workshop prep, protection, and safety gear ready. Taking a bit of extra time and using the proper safety stands and cleaners makes all the difference for a professional result!
🧰 What Else You'll Need:
• Safety First: Always secure your vehicle on heavy-duty safety jack stands before working underneath. Never rely solely on a hydraulic jack.
• Clean Hands: Keep a pack of Nitrile Gloves handy to protect your skin from grease, oils, and chemical sprays.
• Preparation: Have microfibre towels and a suitable parts cleaner nearby to keep components clean during installation.