Kelpro Oil Seal Crankshaft Rear

Kelpro · Part number 97199 · NZ$112.00 incl. GST

When your engine's feeling a bit rough, KELPRO engine parts are just the ticket for getting things humming along nicely again, ensuring your ride stays reliable and performs like a champ.

Price

NZ$112.00 including GST. Part number 97199.

Fits these vehicles

• Bedford CF (1973–1978)
• Bedford CF (1973–1978)
• Bedford CF (1979–1988)
• Chevrolet Bel Air (1954–1957)
• Chevrolet Bel Air (1957–1958)
• Chevrolet Bel Air (1957–1958)
• Chevrolet Bel Air (1957–1959)
• Chevrolet Bel Air (1957–1961)
• Chevrolet Bel Air (1959–1960)
• Chevrolet Bel Air (1959–1961)
• Chevrolet Bel Air (1960–1961)
• Chevrolet Bel Air (1960–1961)
• Chevrolet Bel Air (1964–1966)
• Chevrolet Bel Air (1965–1966)
• Chevrolet C10 (1968–1986)
• Chevrolet C10 (1976–1979)
• Chevrolet C10 (1976–1983)
• Chevrolet C30 (1977–1979)
• Chevrolet C30 (1977–1979)
• Chevrolet C30 (1981–1986)
• Chevrolet C30 (1981–1986)
• Chevrolet Camaro (1966–1968)
• Chevrolet Camaro (1967–1969)
• Chevrolet Camaro (1967–1969)
• Chevrolet Camaro (1968–1969)
• Chevrolet Camaro (1970–1971)
• Chevrolet Camaro (1970–1974)
• Chevrolet Camaro (1970–1981)
• Chevrolet Camaro (1972–1974)
• Chevrolet Camaro (1978–1979)
• Chevrolet Corvette (1962–1964)
• Chevrolet Corvette (1962–1964)
• Chevrolet Corvette (1962–1965)
• Chevrolet Corvette (1962–1965)
• Chevrolet Corvette (1968–1968)
• Chevrolet Corvette (1968–1970)
• Chevrolet Corvette (1973–1981)
• Chevrolet Corvette (1974–1975)
• Chevrolet Corvette (1977–1978)
• Chevrolet Corvette (1977–1982)

Description

Give Your Engine Some TLC: KELPRO Parts to the Rescue!
> Engines are the heart of your vehicle, tirelessly turning fuel into go-power. But like any hard worker, they get a bit tired. Wear and tear, scorching heat, and constant stress can slowly degrade those vital engine parts, which means less grunt and more headaches for you. Time to get it sorted!
Has Your Engine Been Whispering These Troubles?
• Oddball noises from under the bonnet (knocking, ticking, grinding – sounds like a bad day at the office!)
• Feeling sluggish? Less oomph when you put your foot down?
• Chugging through fuel faster than usual?
• Plumes of exhaust smoke that are a bit too dramatic?
• Those pesky engine warning lights have decided to throw a party on your dashboard.
• Finding sneaky oil or coolant puddles where they shouldn't be.
Will it pass WOF?
Absolutely not! Worn-out or dodgy engine parts are a big no-no for your WOF. They can mess with your vehicle's safety and emissions, which means an instant fail. Keeping your engine components in tip-top shape is key for a safe, road-legal ride.
DIY or Workshop?
Difficulty: 7/10 (This one's a bit of a mixed bag; some jobs are easy-peasy, others are a real head-scratcher!)
Estimated Time: 4-12 hours (Seriously depends on what you're tackling and your vehicle's mood!)
Tools Required: A full-blown mechanic's arsenal, proper torque wrenches, special engine jiggers (like timing tools or pullers), a diagnostic scanner to peek inside, and your trusty service manual.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you dive into the nitty-gritty of engine repairs, make sure you've got these bits and bobs handy. Safety first, team, and a clean workspace makes all the difference!
• Always wear your Safety Glasses – you only get one set of eyes!
• Grab some heavy-duty Nitrile Gloves to keep your hands clean and protected from all sorts of engine goo.
• Have a good supply of Workshop Rags on hand for spills and clean-ups.
• An Oil Drip Tray is a must for catching any fluids and keeping your garage floor tidy.
• Consider an Engine Flush additive if you’re doing an oil change alongside other engine work – it helps clean out the gunk.
• If you're dealing with stubborn bolts, a squirt of Rust Penetrant can be a lifesaver.
Expert Recommendation
Bob here at CARFIX can't stress this enough: if your engine parts are showing signs of wear or failure, get 'em sorted pronto! It's the best way to dodge bigger, pricier problems down the track and keep your vehicle purring like a kitten. KELPRO parts are built to OE specifications, which means they're a top-quality choice for most repairs. Pop into Bob's Shop for a yarn – I'm always keen to help you figure out exactly what your vehicle needs!
Fitment Notes
This KELPRO engine part is pretty versatile for general automotive use. Just make sure you double-check the specific part number against your vehicle's make, model, and year. A quick cross-reference means you'll get the right fit, every time.

---

🛠️ Bob's Pro Tip: Do the Job Right!
> If you're replacing this oil seal, make sure you've got the right workshop prep, protection, and safety gear ready. Taking a bit of extra time and using the proper safety stands and cleaners makes all the difference for a professional result!

🧰 What Else You'll Need:
• Safety First: Always secure your vehicle on heavy-duty safety jack stands before working underneath. Never rely solely on a hydraulic jack.
• Clean Hands: Keep a pack of Nitrile Gloves handy to protect your skin from grease, oils, and chemical sprays.
• Preparation: Have microfibre towels and a suitable parts cleaner nearby to keep components clean during installation.