Meyle · Part number 70-16 060 0000/HD · NZ$169.00 incl. GST
Sway bar links are essential for keeping your Tesla Model X handling like a dream, especially when you're carving up those corners. They join the sway bar to the chassis, and MEYLE makes a mean set that we reckon are top-notch.
NZ$169.00 including GST. Part number 70-16 060 0000/HD.
Tesla Model X Sway Bar Link Replacement: A Kiwi DIY Guide
> Sway bar links, sometimes called stabilizer links, are what keep your Tesla Model X from feeling like it's going to tip over every time you take a corner. For a high-performance EV like the Model X, these are absolutely crucial. They often give up the ghost because of rough roads, corrosion, and all that cornering stress.
Spotting the Warning Signs
• Hear a clunking or rattling? Sounds like it's coming from the suspension, especially over bumps.
• Handling feels a bit off, like you're getting more body roll than usual.
• Steering feels vague or just plain unstable.
• You can see the damage or wear on the links themselves.
Will it pass WOF?
Worn sway bar links? Yeah, nah. That's a guaranteed WOF failure. They're all about safety, right?
DIY or Workshop?
Difficulty: 6/10
Estimated Time: 1-2 hours
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you get cracking on those sway bar links, mate, have you got everything sorted? Safety's the name of the game, so don't muck around. Grab some safety glasses to keep the crud out of your peepers, and a decent set of nitrile gloves will save your hands from getting covered in muck. Never get under a car only supported by a jack! Use proper stands!
Expert Recommendation
Worn sway bar links can really mess with your Model X's handling and safety. Getting them replaced keeps everything nice and stable, which is super important for a high-performance EV. Bob @ CARFIX is always here to help you work out exactly what part you need for your Tesla. Make sure you head over to Bob's Shop for a yarn!
Fitment Notes
Make sure the new sway bar links are the right fit for your Model X. Check for left and right-specific parts, and don't forget the torque specs when you're putting everything back together.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're replacing this sway bar link, make sure you've got the right workshop prep, protection, and safety gear ready. Taking a bit of extra time and using the proper safety stands and cleaners makes all the difference for a professional result!
🧰 What Else You'll Need:
• Safety First: Always secure your vehicle on heavy-duty safety jack stands before working underneath. Never rely solely on a hydraulic jack.
• Clean Hands: Keep a pack of Nitrile Gloves handy to protect your skin from grease, oils, and chemical sprays.
• Preparation: Have microfibre towels and a suitable parts cleaner nearby to keep components clean during installation.