Nolathane Sway Bar Link Bushing Kit
Nolathane · Part number 42915 · NZ$86.00 incl. GST
G'day! Keeping your Toyota Hilux or Corolla riding smooth and safe on our Kiwi roads means keeping a keen eye on those suspension bits; good news, Nolathane's got the goods, and CARFIX is stocked to get you sorted.
Price
NZ$86.00 including GST. Part number 42915.
Fits these vehicles
- Audi 80 (1978–1981)
- Audi 80 (1978–1986)
- Audi 80 (1980–1986)
- Audi 80 (1981–1986)
- Audi 80 (1984–1986)
- Audi 80 (1984–1986)
- Audi 80 (1986–1991)
- Audi 80 (1986–1991)
- Audi 80 (1988–1990)
- Audi 80 (1988–1990)
- Audi 80 (1988–1990)
- Audi 80 (1989–1991)
- Audi 80 (1990–1991)
- Audi 80 (1990–1991)
- Audi 80 (1990–1991)
- Audi 80 (1990–1991)
- Audi 80 (1991–1994)
- Audi 80 (1991–1994)
- Audi 80 (1991–1994)
- Audi 80 (1991–1994)
- Audi 80 (1991–1994)
- Audi 80 (1991–1994)
- Audi 80 (1991–1994)
- Audi 80 (1991–1994)
- Audi 80 (1991–1996)
- Audi 80 (1992–1994)
- Audi 80 (1992–1994)
- Audi 80 (1992–1994)
- Audi 80 (1992–1995)
- Audi 80 (1992–1995)
- Audi 80 (1992–1996)
- Audi 80 (1992–1996)
- Audi 80 (1992–1996)
- Audi 80 (1992–1996)
- Audi 80 (1993–1994)
- Audi 80 (1993–1994)
- Audi 80 (1993–1995)
- Audi 80 (1993–1996)
- Audi 80 (1993–1996)
- Audi 80 (1994–1995)
Description
Suspension Components: Time to Get Your Ride Sorted!
> Right, let's talk suspension. Those crucial bits like bushes, mounts, and linkages are the unsung heroes of your ride, soaking up the bumps and keeping your tyres glued to the road. Especially if you're wrangling a tough Hilux or cruising in a classic Corolla, these parts take a beating. When they start to give up the ghost, you'll notice the difference – a rougher ride, dodgy handling, and just generally not feeling right.
Sounds Like You've Got the Symptoms, Eh?
• Hearing clunks or knocks when you hit a pothole?
• Feeling like you're leaning into corners a bit too much?
• Tyres wearing out unevenly, like they've had a rough night out?
• Steering feeling a bit vague, like it's lost its way?
• Your ride feeling more like a pogo stick than a car?
WOF Check: Don't Get Caught Out!
If your suspension is looking a bit worse for wear, you can bet your bottom dollar it'll be a red flag at your WOF check. Safety first, mates!
DIY or Pop into the Workshop?
Difficulty: 6/10 (Can swing wildly depending on the exact component – some are a breeze, some are a beast!)
Estimated Time: 2-4 hours per component (e.g., swapping out a bush)
Tools You'll Need: A trusty set of jack stands, wheel chocks, your socket set, wrenches, a pry bar, and maybe even a special bush tool or press if you're getting serious.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you dive under that vehicle, let's make sure you've got everything you need to do the job safely and properly, just like Bob would:
• Safety First! Never, ever get under a car relying only on a jack! Always use sturdy Jack Stands.
• Free Up Those Stubborn Bolts: A good squirt of Rust Penetrant can be a lifesaver for those bolts that haven't moved in years.
• Protect Your Peepers & Paws: Grab some proper Safety Glasses and a pair of tough Nitrile Gloves to keep your eyes and hands safe from grime and grit.
• Clean Up After Yourself: Keep some Workshop Rags handy for spills and drips.
• Lubrication is Key: Don't forget any specific Caliper Grease or other lubricants recommended for reassembly to prevent future squeaks and ensure smooth operation.
Expert Recommendation
Bob here at CARFIX can't stress this enough: if your suspension's looking a bit rough, get it sorted pronto! It's all about keeping your ride safe and handling like a dream. We reckon Nolathane parts are top-notch, made to OE specs for durability and performance you can trust. If you're scratching your head about what part you need, just pop into Bob's Shop for a yarn – I'm always happy to help you figure it out!
Fitment Notes
This category covers a bunch of suspension bits for your Toyota Hilux (the '97-'05 models) and Toyota Corolla (the '89-'92 classics). Always double-check the specific part's fitment to make sure it's a perfect match for your exact vehicle model and year, eh?
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're replacing this suspension bush, make sure you've got the right workshop prep, protection, and safety gear ready. Taking a bit of extra time and using the proper safety stands and cleaners makes all the difference for a professional result!
🧰 What Else You'll Need:
• Safety First: Always secure your vehicle on heavy-duty safety jack stands before working underneath. Never rely solely on a hydraulic jack.
• Clean Hands: Keep a pack of Nitrile Gloves handy to protect your skin from grease, oils, and chemical sprays.
• Preparation: Have microfibre towels and a suitable parts cleaner nearby to keep components clean during installation.