Frenkit · Part number 11402 · NZ$4.00 incl. GST
Right, for a heap of vehicles out there, these Disc Brake Rotors are absolutely vital, providing the surface where your brake pads get to work, slowing you down and bringing you to a safe stop. This Frenkit option is a top-notch choice, and we stock it.
NZ$4.00 including GST. Part number 11402.
Disc Brake Rotor Replacement — Your "Get It Sorted" Guide with Frenkit!
> Alright, let's talk rotors! These are the shiny metal discs that spin right along with your wheels. When you hit the brakes, those pads clamp down hard on these discs, creating the friction that brings your trusty vehicle to a halt. Over time, all that heat and rubbing means they're going to wear thin, maybe get a bit warped, or even develop some nasty grooves. When that happens, your stopping power takes a real dive, no matter what you're driving.
"Uh Oh" Moments That Brought You Here
• Feeling a judder or pulsation through your brake pedal or steering wheel when you hit the anchors.
• Nasty squealing, grinding, or scraping noises every time you brake.
• Finding it takes a bit longer to stop than it used to.
• Seeing obvious scratches, deep grooves, or funny discolouration on the rotor surface.
• Your brake pedal feels soft or spongy — not a good sign!
Will it pass WOF?
Short answer? Nah, not a chance. If your brake rotors are worn, warped, or damaged, your vehicle will absolutely fail its Warrant of Fitness (WOF) inspection here in New Zealand. Good, reliable braking isn't just a suggestion; it's a critical safety requirement!
DIY or Workshop?
Difficulty: 6/10 (A bit of a challenge, but doable!)
Estimated Time: 1-2 hours per wheel (if you've got some wrenching experience)
Tools Required: A trusty jack and some solid jack stands, a lug wrench, a good socket set, a torque wrench, a C-clamp or a special brake caliper piston tool, some brake cleaner, a wire brush, and maybe an impact wrench if you're feeling fancy.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you dive into swapping out those rotors, let's make sure you're all set up for a safe and smooth job. You'll want to have these bits and bobs handy:
• For blasting away that nasty brake dust: Grab some Brake Cleaner. It'll make sure everything's spick and span before you reassemble.
• To keep those calipers moving freely: A dab of Caliper Grease on the slide pins is a no-brainer. Happy calipers mean happy brakes!
• Protect those peepers: Always wear safety glasses, mate. You don't want any stray bits flying into your eyes.
• Keep those hands tidy: A pair of heavy-duty nitrile gloves will save you from a mucky cleanup later. Plus, they offer a bit of protection.
Expert Recommendation
Bob here at CARFIX always reckons you should replace brake rotors in pairs — that's both front ones or both back ones — to keep your braking super balanced and stop any weird, uneven wear down the track. Honestly, making sure your brake rotors are tip-top is absolutely crucial for staying safe on those Kiwi roads. Never get under a car supported only by a jack!
Bob @ CARFIX is always keen for a yarn and can help you figure out exactly what part your vehicle needs. Pop over to Bob's Shop for a chat — the kettle's always on!
Fitment Notes
This particular SKU (11402) is described as a general application product. But hold your horses! Always, always cross-reference this with your vehicle's specific make, model, and year to make sure it's a perfect fit. Brake components aren't a one-size-fits-all deal, even if this one seems general. Double-check your vehicle's manual or have a chat with a CARFIX expert for precise compatibility. Better safe than sorry!
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're replacing this part, make sure you've got the right workshop prep, protection, and safety gear ready. Taking a bit of extra time and using the proper safety stands and cleaners makes all the difference for a professional result!
🧰 What Else You'll Need:
• Safety First: Always secure your vehicle on heavy-duty safety jack stands before working underneath. Never rely solely on a hydraulic jack.
• Clean Hands: Keep a pack of Nitrile Gloves handy to protect your skin from grease, oils, and chemical sprays.
• Preparation: Have microfibre towels and a suitable parts cleaner nearby to keep components clean during installation.